Fully Automatic Chain Link Machine has the below advantage:
1. It highly saved labor costs, at the same time, increased the work efficiency.
2. It can keep on working more than 72 hours.
3. As time goes by, the mould and the machine will matched very well, as a result, the machine will work more
and more fast.
4. Easy machine principle, low fault rate, half a day is enough to teach your worker.
5. Quickly service: Once your machine has problem, we will give you the solution within 10 minutes on work
days, and 8 hours on weekends.
The machine can work with the below chain link fabric:
|Max. 6 meters
||If you need more bigger or small, pls contact us.
||(If you need more thicker or thin, pls contact us)
Chain Link Machine Detail Show:
1. Serve Motor
All of our machine using Serve Motor, which can give you the below different work states:
A: Accurate control speed and position, accurancy can not be changed by the speed adjustment.
B: Keep the stable-speed running and powerful torque condition, the high production is ensured.
C: At the high-speed running and powerful torque condition, the high production is enqured.
All of our machine can work with both Barb Edge and Knuckle Edge. This video can show you our machine is working on one
side barb and the other side Knuckle
Certainly, Using PLC can make the operate more easy. Moreover, our PLC can give you differant experience when you want to
change something or when your machine has problem. Because all of machine buttons marked number which matched the PLC
inside control number like the below photo:
1. We have more than 12 years of experience producing chain link machine. The machine can running very well.
2. You can use our machine directly once you get electricity. No need to connect wires or adjust the machine. Which can save your time and overseas service cost.
3. We use Servo Motor on the machine. As result, the machine can running very fast and lso you can adjust many things through the PLC.
4. We using big and thick frame tube on the machine. Moveover, E-coating will be used as the machine surface finish. As a result, the machine produced by us is very strong and realy beautiful.
packing and Loading for chain link machine:
I. plastic film or bubble film which protect machine from rust on the humid environment on sea
II. Spare parts are in wooden box
III. All devices will be fasten in container to avoid the shake on road
6. FAQ to Hebei Diaozhuo Machine Co.,LTD
Q1: Where is your factory located?
A: Our factory is located in Anping county, Hebei Province of China. The nearest airport is Beijing airport or Shijiazhuang airport. We can pick you up from Shijiazhuang city.
Q2: How many years are your company engaged in the wire mesh machines?
A: More than 25 years. We have our own technology develop department and testing deparment.
Q3: Can your company send your engineers to my country for machine installation, worker training?
A: Yes, our engineers went to more than 100 countries before. They are very experienced.
Q4: What's the guarantee time for your machines?
A: Our guarantee time is 2 years since the machine was installed in your factory.
Q5: Can you export and supply the customs clearance documents we need?
A: We have much experience for exporting. And we can supply the CE certificate, Form E, passport, SGS report etc, your customs clearance will be no problem.